Whether you’re a newbie quilter or someone who has been sewing for decades, there’s always something new to learn – be it a time-saving tip or a new handy notion.
I am made aware of my knowledge...and lack of knowledge every time I get an email from a fellow quilter asking about specific sewing techniques.
Before responding to those emails or blog comments, I sit back in my chair and think, “OK Suzy. This is it. The fate of this person’s success or failure rests solely in your hands. If this advice isn’t well articulated and absolutely accurate, the world may lose a quilter due to unnecessary frustration at trying to follow your poor advice. Suzy. This is serious. Whatever you do. Don’t. Mess. This. Up.”
Check out my favorite sewing notions!
- How to Choose the Right Quilt Batting
- The Best Sewing Table
- The Best Quality Thread: Part 1 and Part 2
- 5 Best Cutting Mats for Quilters
- Best Rotary Cutter
- The 4 Best Quilting Rulers
- The Best Iron for Sewing
- The World's Best Sewing Scissors
- Your Guide to Finding the Best Thimble
- Best Pins for Quilting
- Fusible Batting Tape: Why You Need It and How to Use It.
Once, when asked about thread tension on a sewing machine, I did 45 minutes of research before panicking and glibly responding, “That’s a great question for your sewing machine dealer. Good luck!”
I’m sure the person thought I didn’t want to take the time, but the embarrassing truth was, I was taking TOO much time. Too much time to overthink what the “right” answer was, that I ended up giving no answer and offering no help.
This post is my way of getting over the fact that I am not the best sewer. I’m not the best quilter. And I most definitely do not know what’s wrong with your sewing machine (so please oh please don’t ask me!) However, I’ve learned a few things over the last 20 years that may help. If you’ve been quilting for a while, this may be old news. But, hopefully, you’ll walk away with some helpful tidbit.
For my own organization, I’m going to list things by category (That way you can skim easier too.) Oh, and before I forget, if you would like a list of quilting terms, tools and supplies, visit this blog post.
Needles, Rulers & Rotary Cutters
- Needles: I like to use a regular universal 80/12 needle in my sewing machine when piecing quilt blocks. When I machine quilt the three layer quilt sandwich, I can usually keep the same needle or switch to a 90/14 because they punch through multiple layers of fabric with more ease.
- Rulers: Inevitably, the longer you quilt, the more rulers you acquire. If you’re new, I suggest starting with a 6" x 24" Omnigrid. For more info on common ruler sizes, check out this blog post.
- Rulers: If your ruler does not come with grippy pads on it, buy some and stick them on your ruler. That will save your wrist from having to force all of your body weight onto the ruler to keep it from shifting while you cut.
- Rulers: I’ve never regretted a ruler purchase. So, if you have a quilt pattern that would be made easier with a specifically sized ruler, my advice? Treat yourself. It will make the process more fun and probably more accurate. An example of this is my Kris Kross quilt pattern. The unfinished blocks are 6 ½" x 6 ½". The quilt can definitely be made without a 6 ½" square ruler, but having one makes the job go 4 times faster. And who doesn’t want that??
- Rotary Cutters: Fact: quilters are frugal...kinda. Let me explain. Our quilty heritage was birthed out of necessity and economy. Historically, we quilters would make patchwork quilts from whatever was leftover—the scraps. I think that mindset still seeps into our point of view today. So I know what I’m about to say goes against that—try not to use a dull rotary blade. Yes, they are expensive and yes, I have been guilty of straining my shoulder and repeatedly running over the same cut because I don’t want to waste a single blade. But, I really don't recommend that. A dull blade is a dangerous blade (this is coming from a girl who has sliced part of a finger off and spent the night in an ER) Here’s my solution—get a rotary blade sharpener. It’s loud, makes a terrible noise and will probably scare your dog, but it will drastically expand the life of your rotary blades. Yay!!
Fabric & Batting
- Fabric: If you’re new to quilting, I suggest sticking with 100% cotton. Quilt-weight cotton usually comes on a bolt with a width of 42". What that means is if you purchase a yard of fabric off the bolt, you will get a piece that is 42" x 36".
- Fabric: I know Joann Fabrics is easy and probably pretty convenient, but a lot of the fabric sold there is of low quality. There are some high quality fabrics there, but the prices have been jacked up so high it isn’t worth buying them. I suggest finding a local quilt shop (LQS) or buying your fabric online. If you are an online fabric shop owner, or if you have a favorite online fabric shop, please leave the info in the comments so we can visit! 🙂
- Fabric: Pre-washing v. NOT pre-washing. Read about that in more detail here! First off, do not pre-wash pre-cuts (What are pre-cuts? Visit here) of fabric. Washing and drying cotton fabric causes 5-8% shrinkage and could throw off a quilt pattern if you do not have the exact amount of fabric as the pre-cut bundle says. Aside from pre-cuts, feel free to pre-wash. Because the fabric shrinks before you piece it, once your quilt is washed, it’s overall look will not drastically change. However, if you do not pre-wash your fabric, once you wash your quilt that first time, it will pucker and shrink, causing a more vintage look.
- Batting: Read aaaaaall about batting here. The batting world is big and wide and wonderful!
Irons & Starch
- Irons: Before ironing, light fabric especially, double check the metal plate of your iron to make sure there is no gunk. I have accidentally marked up fabric because of a dirty iron. Try to avoid doing that at all costs...cause it super sucks. Rather than throwing your dirty iron off your third floor balcony, try cleaning it! I use this iron cleaner and so far so good.
- Irons: I’ve owned expensive irons, and without fail, they all spit and sputter water when I try to use the steam function. So my conclusion? Get a spray bottle and never fill the water tank on your iron.
- Irons: Before ironing your seam to the side (which I waaaaay prefer to ironing seams open), set your seam. What this means is pressing the iron onto the flat seam so the fibers in the fabric set around the sewn seam. This makes for crisper, flatter looking seams.
- Starch: (For an in depth article on starch, visit this post.) I only use starch if I absolutely have to because starch and water can stretch fabric. Situations when I would use starch would be: sewing curves and sewing intricate blocks that need to lay flat for accuracy.
Leave a comment if you have any sewing advice you'd like to add! xo